• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 164 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913Q-Q1: is 913Q to 954 possible?

AnBer
Mastermind 28900 points
Part Number: DS90UB913Q-Q1

Team,

Actual camera system looks like the following:
DS90UB913Q -> DS90UB914Q

For system upgrade (CSI-2 on RCV side) is DS90UB913Q -> DS90UB954 possible?
or is DS90UB913A -> DS90UB954 a must?
Any TI reference design or HW design guideline available for this use case?

Thanks in advance,

A.

  • 0
    TI__Guru* 83860 points

    Hello Anber,

    This was not validated, but it should be okay to pair the 913Q with a 954. But, if possible to switch to the 913A or even 933 would be better, because we do not recommend 913Q for new designs.

    There is no special guidelines for the HW design in this case. Just follow the design guide lines in the 954 datasheet!