This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD2S701-Q1: question about OVP threshold and D± Clamping Voltage

Part Number: TPD2S701-Q1

Hi team,

I see both OVP threshold and D± Clamping Voltage can be adjusted by Vref, but D± Clamping Voltage is always larger than OVP, where VBR approximately = 0.7 V, IRDYN approximately = 1 V as stated in datasheet.  My question is, during ESD test, would D± Clamping Voltage trigger the OVP threshold?