DS16EV5110A: SPEC CHECK

GARETH OU

Part Number: DS16EV5110A
Other Parts Discussed in Thread: DS16EV5110

My customers need the following functions, use CAT5 signal to connect HOST and Display terminals
(HDMI to CAT5 and CAT5 to HDMI)
1. Is there a schematic diagram or information?

over 3 years ago

0 Nasser Mohammadi over 3 years ago

TI__Guru* 93670 points

Hi Gareth,

You can use DS16EV5110 EVK schematic as guideline. Except instead of going to HDMI you can replace this with RJ45 connector for CAT5 cable. Device does not know if it is being connected to HDMI connector or RJ45 CAT5 cable.

Regards,, Nasser

Interface

Interface forum

DS16EV5110A: SPEC CHECK