DP83849IF: About TS-1000

Hide

Guru 21045 points

Part Number: DP83849IF
Other Parts Discussed in Thread: DP83822IF, DP83869

Hi Team,

We are looking for TS-1000 compliant Ether PHY.

Do you have suitable TI devices?

If yes, could you please let us know a parts number?

By the way, I refer to the following E2E thread, and understand that DP83849IF can’t support TS-1000.

Is my understanding correct?

https://e2e.ti.com/support/interface/f/138/t/899130?tisearch=e2e-sitesearch&keymatch=DP83849I

Regards,

Hide

over 3 years ago

0 Vikram Sharma over 3 years ago

TI__Genius 16030 points

Hello Hide,

We have 3 100BASE-FX (IEEE 802.3u) capable PHYs : DP83849IF, DP83869, DP83822IF. Do you know what extra is required by TS-1000 over 100Base-FX and are you planning to use that?

For example : while going through the TS-1000 standard, I noticed that there is a provision to enable data loopback tests usin OAM. Is this required by your application?

Regards,

Vikram

0 Hide over 3 years ago in reply to Vikram Sharma

Guru 21045 points

Hi Vikram-san,

Thank you for your prompt reply.

We are considering whether to apply TS-1000 for application.

Therefore, we are looking for the device that contains all TS-1000 requirements.

(I think "Enable data loopback tests usin OAM " is also included.)

I guess that TI devices are not designed for all TS-1000 requirements.

Is my understanding correct?

Regards,

Hide

0 Vikram Sharma over 3 years ago in reply to Hide

TI__Genius 16030 points

Hello Hide,

I got the confirmation that we dont support OAM based data loopback.

Regards,

Vikram

0 Hide over 3 years ago in reply to Vikram Sharma

Guru 21045 points

Hi Vikram-san,

Thank you for the information.

I greatly appreciate your cooperation.

Regards,

Hide

Interface

Interface forum

DP83849IF: About TS-1000