TPS65987D: About VBUS LED of sink board of USB-C-PD-DUO-EVM

Hide

Guru 21045 points

Part Number: TPS65987D
Other Parts Discussed in Thread: USB-C-PD-DUO-EVM, TPS65981, TIDA-050012

Hi Team,

We are evaluating TPS65987DDH at the following condition.

Then, source board supply 5V and around 800mA at source and sink capability 5V/0.9A so correct behavior.

However, VBUS LED of sink board is blinking.

Could you please let us know the conditions for VBUS LED to blink on sink board?

Our develop source board** => USB-C-PD-DUO-EVM Sink Board* => Dummy Load.

*EVM are default setting.

**Raw view value setting of TIDA-050012 source board of TPS65981_2_6_7_8 Application Customization 6.1.

Regards,

Hide

over 3 years ago

0 Michael Emanuel35 over 3 years ago

TI__Mastermind 29945 points

Dear Hide,

Can you please program your board with the Standard TPS65987DDH project? You are programming your board with a project meant specifically for the TIDA-050012 which has specific programming for the buttons on the source board.

In addition, the diode for VBUS on the sink board indicates the power status directly. If it is blinking, it means that there is an unstable supply. Can you please probe the VBUS line on the sink board if this still happens after reprogramming your board?

Thanks,

Mike Emanuel

Please click "Resolved" if this answered your question.

0 Hide over 3 years ago in reply to Michael Emanuel35

Guru 21045 points

Hi Mike-san,

Thank you for your response.

I greatly appreciate your cooperation.

Regards,

Hide

Interface

Interface forum

TPS65987D: About VBUS LED of sink board of USB-C-PD-DUO-EVM