TUSB1210: TUSB1210 not detected

rav venkaatesh

Part Number: TUSB1210

Hi,

I am using TUSB1210 with ZynqMP Ultascale board, i am unable to detect the phy, i am unable to understand the device tree inclusions that need to be made for getting it detected. Please help me with device tree changes that nedd to be made for getting it detected.

Thanks & Regards

Venkatesh R.

over 3 years ago

0 Brian Zhou over 3 years ago

TI__Guru** 105055 points

are you using TUSB1210 EVM from ti.com?

0 rav venkaatesh over 3 years ago in reply to Brian Zhou

Prodigy 20 points

hi,

No, actually i am using usb1210 phy chip in ZynqMP ultrascale+ custom board. Please help me with the process of modfying the device tee file, i.e ., the nodes that must included for detecting it.

Thanks & Regards,

Venkat R.

0 Brian Zhou over 3 years ago in reply to rav venkaatesh

TI__Guru** 105055 points

you may need to contact ZynqMP builder for help. We are not familiar with their file

Interface

Interface forum

TUSB1210: TUSB1210 not detected