Other Parts Discussed in Thread: USB-2-MDIO, MSP-EXP430G2ET, UNIFLASH
Hello team,
My customer is trying to set PHY configuration via USB-2-MDIO SW Tool.
Could My customer checked the MDC waveform.
However, customer sees the MDC waveform is fixed to low while sending Find PHY ID command or register read .
In a couple of previous threads, this issue looks like still not solved.
e2e.ti.com/.../784057
e2e.ti.com/.../3516574
e2e.ti.com/.../2888342
Could you please support?
Regards,
Itoh