This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are able to get USB2.0 to work with our TUSB7340-based design, but USB3.0 doesn't work. Please let me know if you see anything wrong with this schematic that might cause USB3.0 to not work.
try to replace C49/C50 with 0.33uf.
can you send full schematic?
Also, you cannot connect the superspeed lines to both sides of the USB-C connector. You will need a mux like the HD3SS3212 or TUSB542.
Here you go Brian ...
Thank you Brian.