Other Parts Discussed in Thread: THVD1410,
Hello team,
I have a question about THVD1419 and THVD1410.
They have full failsafe functionality at RX side.
So external failsafe resistors (PU, PD) are not required, correct?
Regards,
Itoh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The receiver's switching threshold is between -100 mV and -130 mV (typically), so that a differential input voltage of 0 V is read as high.
External failsafe resistors are needed if you want a noise margin larger than 100 mV (20 mV in the worst case).