Hi, There
We are using TUSB3410RHB in our new design. We need your help to confirm its I2C on following:
Can it I2C interface EEPROM and another I2C Gas gauge Chip in the same I2C bus?
Thanks & Regards
David
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, There
We are using TUSB3410RHB in our new design. We need your help to confirm its I2C on following:
Can it I2C interface EEPROM and another I2C Gas gauge Chip in the same I2C bus?
Thanks & Regards
David
Hi David,
As long as the EEPROM and I2C Gas gauge chip do not share the same I2C device address then both can be connected to the primary I2C bus of TUSB3410 (P3_3/P3_4). The EEPROM used to load USB to I2C FW at boot is placed on a different I2C bus (SDA/SCL).