Hi TI team,
I like to get some info how I can tune RX EQ & TX amplitude/emphasis with this EVM. Pls advise.
Thanks
Jun
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI team,
I like to get some info how I can tune RX EQ & TX amplitude/emphasis with this EVM. Pls advise.
Thanks
Jun
Jun
The VSADJ, PRE, EQ, and ERC are controlled by external 10k pulled up to 1.8V or 10k pulldown.
VIH -> 10k pullup to 1.8V
VIL -> 10k pull down to ground
VIM -> floating
Please refer to Table 1 in the datasheet for the EQ selection.
Please refer to Table 2 for the ERC selection
Please refer to Table 3 for the VSADJ and Pre selection
You can use the example in section 8.2 as your tuning guide.
Thanks
David