DPHY440SSRHREVM: DPHY440SS

jun li

Part Number: DPHY440SSRHREVM

Based on TI, DPHY440 supports up to 5dB at 750MHz and 2.5dB DE on its TX. Can I understand that retimer RX can compensate 5dB channel loss and retimer TX can compensate 2.5dB channel loss (processor EQ not included)?

Thanks
Jun

over 3 years ago

0 David (ASIC) Liu over 3 years ago

TI__Guru**** 154141 points

Jun

Your understanding on the RX EQ and TX DE is correct.

Retimer RX can compensate 5dB channel loss at 750MHz Nyquist frequency.

Thanks

David

0 jun li over 3 years ago

Prodigy 90 points

and TX DE can compensate 2.5dB channel loss?

0 jun li over 3 years ago in reply to David (ASIC) Liu

Prodigy 90 points

Also where can I buy HDR-128291-XX?

+1 David (ASIC) Liu over 3 years ago in reply to jun li

TI__Guru**** 154141 points

Hi,

The TX Pre-emphasis can provide 0dB or 2.5dB compensation.

The breakout board looks like this: suddendocs.samtec.com/.../hdr-128291-xx.pdf

You will have to contact Samtec for ordering information.

Thanks

David

Interface

Interface forum

DPHY440SSRHREVM: DPHY440SS