Is the LOS signal of ONET1151P too low power or signal LOS?Which register can be used for control?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Is the LOS signal of ONET1151P too low power or signal LOS?Which register can be used for control?
Greetings,
LOS signal is asserted when signal level falls within certain threshold.
LOS event causes LOS pin to get activated. Through the register LOS pin assert level can programmed - if desired. In any case, LOS pin indicates loss of signal occurence.
Regards,, nasser