Dear Expert
When we were using SN65DSI84 chip, we found that the software could not configure it successfully, resulting in no output of DSI clock. Please help to confirm:
LVDS Displayer & Rigister Setting.rar
1. This is the screenshot of our current schematic design, please help to confirm whether there is any problem in the hardware design:
(The left DSI signal is the native output of ARM, and the I2C signal specially configured for LCD, and the right is the LVDS output of our double link, which is directly sent to the LVDS display after taking protective measures);
2. The attachment is the configuration file we generated after configuring the DSI Tuner according to the current display specifications and referring to the video teaching. Please help to confirm whether there is any error.
(If possible, please help guide the configuration file. The attachment is the specification of the display screen we are using now. If you need other information, please feel free to contact me.)
3. According to the information we collected, the clock signal cannot be seen in the test at present. It may be that the DSI works in the low-power mode (ULPS) and the clock output can only be produced in the high-speed mode (HS).
