• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83848I: Direct replacement with TLK110

Furkan Fehmi Sefiloglu
Expert 3118 points
Part Number: DP83848I
Other Parts Discussed in Thread: TLK110,

Hı Team,

Can you please check and advise with following request:

"

We use TLK110 series in our current design. We see that the pins of the DP83848I IC except the 21st pin are p2p. That pin is pulled up with 3.3V. In DP83848I, this pin is seen as reserved. Can we use this IC in our design directly?

"

Thanks in advance

Best Regards

Furkan Sefiloglu

  • 0
    TI__Genius 16025 points

    Hello, 

    Yes it is pin2pin compatible. During the rollover from one to another device we recommend checking for the straps, register configuration, power up sequence and application network for TPI to check the compatibility.

    --

    Regards,

    Vikram