SN65HVD09: Full Duplex Solution

Jejomar Ildefonso

Part Number: SN65HVD09
Other Parts Discussed in Thread: SN75178B

Hi Team,

Our customer is looking for an RS-422 to TLL converter/transceiver with 60mA output current. We've found the SN65HVD09 which suits most of their requirements but it only operates in half-duplex with multiple channels.

Can you help us recommend an alternate full duplex solution having fewer channels other than SN65HVD09?

Thanks in advance!

Kind Regards,

Jejomar

over 3 years ago

0 Chris Ayoub over 3 years ago

TI__Genius 15345 points

Hi Jejomar,

Could you share some more requirements of your system? The channel requirement, signaling rate requirement, fault protection requirement etc.

In the meantime you can look through all the full duplex RS485 and 422 transcievers . If the 60mA output current is the only requirement of your system then we can start from there.

Best,

Chris

0 Jejomar Ildefonso over 3 years ago in reply to Chris Ayoub

TI__Genius 9010 points

Hi Chris,

Apologies for the delay. We've managed to find the product which suits the customer's needs and it happened to be the SN75178B.

Many thanks for your support.

Kind Regards,

Jejomar

0 Chris Ayoub over 3 years ago in reply to Jejomar Ildefonso

TI__Genius 15345 points

Jejomar,

That is great to hear. I am going to close the thread.

Best,

Chris

Interface

Interface forum

SN65HVD09: Full Duplex Solution