• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 116 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TD510E-EVM: Using the dev board with sitara dev boards

Antonio Muchaxo
Intellectual 315 points
Part Number: DP83TD510E-EVM
Other Parts Discussed in Thread: DP83TD510E,


Hello,

is there any chance to use the half of DP83TD510E-EVM where the DP83TD510E chip and interconnect it to a Sitara dev board?
If yes, which?
If not, are there any other dev boards that you could recommend looking into that integrate 10BASE-T1L functionality and a Sitara?

Thank you.

Antonio

  • 0
    TI__Expert 3595 points

    Hi Antonio,

    Yes this should be possible. I'm not sure which processor would be best for this application, so I'll switch this ticket over to the processors team and have them offer advice!

    Thanks,

    Lysny

  • +1
    TI__Genius 13455 points

    Hi Antonio,

    Unfortunately all of our current Sitara EVMs have the Ethernet signals terminated with a 10/100Mbps or 1000Mbps PHY and connector, so nothing really ideal that would let you simply plug in the edge connector of this EVM. We also do not have any Sitara EVMs that already integrate this PHY, at this time.

    Regards,
    Mike