• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 171 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953-Q1EVM: Availability of V4L2 driver

Martin Falk Jensen
Prodigy 10 points
Part Number: DS90UB953-Q1EVM

Hi,

I have a DS90UB953-Q1EVM connected to an interface board with 4x TI DS90UB960 (board from company D3 Engineering) going to an Nvidia Jetson Xavier AGX developer kit.

I would like to use the Q1EVM pattern generator to simulate a CSI-2 camera for testing above system. 

Does TI have a V4L2-compliant driver for Linux4tegra (L4T) for the DS90UB953-Q1EVM?

If not, can you recommend a way forward?

Thanks,

  • 0
    TI__Guru* 98495 points

    Hello Martin,

    For support on the 960 board from D3, please contact D3 directly since I believe that they have created SW drivers for Jetson. For 953 specifically, generally programming is extremely simple and in some cases no programming at all is required to the 953 itself to fully operate the SERDES link. If you have specific questions on register configuration based on what you are trying to set up, then we can assist you here, but we don't provide full Linux drivers from the TI side 

    Best Regards,

    Casey