• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 33 subscribers
  • Views 283 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1042V-Q1: TCAN1042 variant differences? H? V? HV? -Q1?

c tyerman
Prodigy 140 points
Part Number: TCAN1042V-Q1
Other Parts Discussed in Thread: TCAN1051, TCAN1051HV-Q1

Can someone explain the differences between the different variants of the TCAN1042

H? V? HV? -Q1?

some seem to be out of stock or others are available

a comparison in search shows no differences other than slight variations in package and price

  • +1
    Guru 243220 points

    G indicates 5 Mbps.
    H indicates ±70 V bus fault protection.
    V indicates I/O level shifting.
    Q1 indicates AEC-Q100 qualification.

    This is shown in the Device Comparison Table in the datasheet.

  • +1
    TI__Guru 60112 points

    C,

    Thanks for bringing this to E2E. If you look in the electrical characteristics and pinout sections of the datasheet, these variants are explained.

    -V: Versions with the -V suffix have a VIO pin which allows the transceiver to work with 3.3V logic levels on TXD, RXD, and STB rather than just 5V

    -H: Versions with the -H suffix have extended CAN bus voltage protection, +/-70V rather than +/-58V in the non-H versions

    -Q1: Q1 means that the device was qualified under the AEC-Q100 definition for qualification for Automotive standards

    Please let me know if you have any questions.

    Regards,

    Eric Hackett 

  • 0 in reply to Eric Hackett
    Prodigy 140 points

    thx, for what i was intending i think i only need one that has a V however they all appear to be out of stock, are there any others that are functionally equivalent, i can ask as a separate question if needed

  • 0 in reply to c tyerman
    TI__Guru 60112 points

    C,

    TCAN1051 has the same function besides pin 8. On TCAN1042 pin 8 controls standby mode which disables the CAN bus driver and receiver when a logic high is applied to the pin. On TCAN1051 pin 8 controls silent mode which only disables the CAN bus driver when a logic high is applied to the pin.

    The TCAN1051V is likely out of stock too, but I think last time I checked the TCAN1051HV-Q1 had some devices in stock.

    Regards,

    Eric Hackett