• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD10

Aditya Rane57
Prodigy 215 points

Hi Support,

Just need some clarification. As per the datasheet Recommended operating condition is -7V to 12V.

Does it mean that at any given time between A & B, A can go as low as -7V and B can go as high as 12V at the same time or vice versa?

Thanks.

  • +1
    TI__Guru 60042 points

    Aditya,

    No, it does not mean at any given moment these pins can go as low as -7V and as high as 12V. This parameter means that the bus pins can interpret voltages between this range in case there are ground or source shifts within the application. 

    Please let me know if you have any other questions.

    Regards,

    Eric Hackett