TUSB211-Q1: Brown out recovery

Shinji Tsuji

Genius 12338 points

Part Number: TUSB211-Q1

Hi team,

Could you advise if there is any specific recovery operation is required after brown out condition?

Brown out means the supply voltage drops momentary and recovered to normal supply voltage in a short period.

regards,

over 2 years ago

+1 Malik Barton57 over 2 years ago

TI__Guru 64326 points

Hi Shinji,

For Brown-out condition I would expect that RSTN pin is toggled to recover device performance after a proper reset. In this case if USB 2 HS enumeration does not happen after reset boosting will not be enabled again after reset.

0 Shinji Tsuji over 2 years ago in reply to Malik Barton57

TI__Genius 12338 points

Hi Malik,

Do you mean that USB2 HS enumeration is required after RSTN toggle?

regards,

+1 Malik Barton57 over 2 years ago in reply to Shinji Tsuji

TI__Guru 64326 points

Hi Shinji,

Correct.

Interface

Interface forum

TUSB211-Q1: Brown out recovery