HI Sir,
in our designs we are using DS80PCI102 , we want to use it without any software provisions. So can you please guide me in the configuration of pins without any software requirements.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI Sir,
in our designs we are using DS80PCI102 , we want to use it without any software provisions. So can you please guide me in the configuration of pins without any software requirements.
Hi Sai,
Main parameter to tune or adjust are Rate pin, EQ settings(EQA0-A1, EQB0-B1) and DEMA/DEMB. Please refer to table 2 of the data sheet. Based on your board insertion loss, you can select appropriate settings. Please refer to the data sheet for detailed discussion.
Regards,,Nasser