This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Replies: 6
Views: 3192
Hello Team
Can you please assist with the customer's inquiry below? Thank you
Contact's Information
Date Opened: 7/19/2010 02:23:04 PMCompany Name: AeroflexContact Name: Tom SuttonContact Phone: (949) 362-2260 x17Contact Email: tom.sutton@aeroflex.comAddress: 120 Columbia Dr.Suite 200City and State: Aliso Viejo, CAPostal Code: 92656
Customer's Application
GPN: SN65MLVD200ANon GPN:
Customer's Anticipated Volumes
Volumes: [Type Volumes Here]
GEN, Semiconductor Technical Support, www-k.ext.ti.com, SN65MLVD200AI want to use the SN65MLVD200A on my system. I want to simulate my system with SPICE. I was wondering if there is a SPICE model of the SN65MLVD200A. If there is a SPICE model does it include the resistors, etc. shown on the Equivalent Input and Output Schematic Diagrams in the datasheet ?
The customer reply with the following. I am not familiar with using the IBIS model. I am trying to use this model to drive a transmission line model of the cable I am using. I am using Mentor Graphics ELDO simulator, which is a SPICE simulator very similar to the HSPICE SPICE simulator. The ELDO simulator can use the IBIS model, and the ELDO manual has one example of using an IBIS model. But the example in the ELDO manual is not very clear on how to include the call in the ELDO input file to call the IBIS model. Is there someone who can tell me how to make the call in a generic SPICE input file to call the SN65MLVD200A IBIS model? I am just trying to do a simple simulation of putting an input into a SN65MLVD200A and then having the SN65MLVD200A driving the transmission line model of the cable I am using.
Hi,
I use hyperlynx for ibis model simulations. If there is any particular simulation customer want to run, i can help.
/Ajinder
In reply to Ajinder Singh:
Hi Ajinder
He is trying to use the IBIS model to drive a transmission line model of the cable he is using. He is also using Mentor Graphics ELDO simulator
Orlando
In reply to Orlando Richardson:
I did some simulations - just as an example using Hyperlynx. I used the ibis model of MLVD200A and a microstrip trace model.
This is just an example of the tool and ibis model usage.
I will work on getting the hspice model generation of MLVD200A, so that the customer can use either a tool like Hyperlynx or any spice simulator.
Ajinder
Thank you
Orlanda
I have attached the hspice model