This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPD2EUSB30A
We have a customer who is asking for the Tape and Reel tolerance for this device. There is no reference to any tolerance, only "Nominal". Is there anything we can provide?
"I can't find the tolerance of the tape & Reel dimension, For example: Pocket Pitch: 4 /- ? mm, A0 Width : 1.16 /- ? mm and so on, but from the TPD2EUSB30ADRTR's datasheet it indicates "All dimensions are nominal" only, please advise."
Gabe GarzaTI Technical Support
Cameron PhillipsApplications | firstname.lastname@example.orgHigh Side Switches/ESD & Surge Protection
If this answers your query, Please click "This resolved my issue" button.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Cameron Phillips:
In reply to Gabriel Garza45:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.