This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB2036: Circuit change point of three port use of USB

Part Number: TUSB2036

Hello.

It is the continuation of the following post.
e2e.ti.com/.../2344136

I tried it on a prototype.
I set the NP3-pin to Low and set it to use 3 ports, all 3 ports did not work.

Experimentally, I set the NP3-pin to High and set it to use 2 ports, 2 port did work.

I attach a circuit.

Please let me know the wrong part.

Regards,
Dice-K