This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

SCAN921226H: What do I have to use for a new design to control the old equipment with the DS92LV1212A and DS92LV1021A?

Intellectual 920 points

Replies: 3

Views: 367

Part Number: SCAN921226H

Because the DS92LV1212A and DS92LV1021A are obsolete and only the new parts are available.

I cannot update equipment that is already in the field and in use.

Can you tell me if the usage of the SCAN921025H and SCAN921226H can be combined with DS92LV1212A and DS92LV1021A?


In our old designs we use the DS92LV1212A and DS92LV1021A.

If I connect a new design with the SCAN921025H and SCAN921226H to the designs with the old IC's, will this work with out any problems?

Thus SCAN921025H connected to DS92LV1212A and SCAN921226H connected to DS92LV1021A

How to solve this problem?

What do I have to use for a new design to control the old equipment with the DS92LV1212A and DS92LV1021A?

Thx for your information and advice.

  • Hello,

    We will look into this and get back to you.

    Regards,
    Yaser
  • In reply to Yaser Ibrahim:

    Hello Yaser,

    How to solve this problem?

    What do I have to use for a new design to control the old equipment with the DS92LV1212A and DS92LV1021A?

    Thanks for your information and advice.

    Regards,
    Eric
  • In reply to Eric Cui13:

    Hi,

    The recommended replacement for DS92LV1212A/DS92LV1021A is SN65LV1023A/SN65LV1224B.  These devices can be mix & matched, and shall work with your old design.

    SCAN921025H/SCAN921226H should work as well.

    Best Regards,

    Charley Cai

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.