• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB948-Q1EVM: Wrong profile apply in ALP for DS90UB947/948 EVM...

Peter Tseng
Genius 5555 points
Part Number: DS90UB948-Q1EVM
Other Parts Discussed in Thread: ALP, USB2ANY

Dear Sirs,

I found the ALP GUI can detect and apply wrong profile while 947 and 948 EVM attached but 927/928 are correct.

I need to add/remove to related EVM profile once I changed attached EVM.

Is that normal or what I need to do for detect correct?

Thanks. 

  • 0
    TI__Mastermind 21685 points
    Peter,

    >>>>I need to add/remove to related EVM profile once I changed attached EVM.

    Once you change attached EVM, you have to select the correct corresponding Profile under USB2ANY / Aardvark Setup. ALP does not select the profile automatically. It can only confirm whether the profile selected matches what's read from the attached EVM. For example, if I select 928 EVM as my profile but EVM attached is 954 it will report under info tab "Unknown FPD-Link III Deserializer"

    Thanks,
    Vishy