TUSB1046A-DCI: How to get EVM with TUSB1046A-DCI

Tamio Yokokura

Part Number: TUSB1046A-DCI
Other Parts Discussed in Thread: TUSB1046EVM, TUSB1046-DCI

I would like to get the EVM assembled TUSB1046A-DCI for customer support. The TUSB1046EVM is not assembled TUSB1046A-DCI as far as I saw the users guide. Please teach me how to get EVM assembled TUSB1046A-DCI.

Thanks

Tamio

over 5 years ago

0 Malik Barton57 over 5 years ago

TI__Guru 64326 points

Tamio,

Could you give more details? What you do mean by not assembled?

0 Tamio Yokokura over 5 years ago in reply to Malik Barton57

TI__Expert 3560 points

Hi, Barton

I would like to get the EVM which TUSB1046A-DCI is mounted to debugging customer problem. I can see only TUSB1046EVM in web site. How can I get the EVM that mounted TUSB1046A-DCI?

Thanks

Tamio

0 Malik Barton57 over 5 years ago in reply to Tamio Yokokura

TI__Guru 64326 points

Tamio,

Both TUSB1046-DCI and TUSB1046A-DCI share the same EVM. You should be able to use TUSB1046-DCI, TUSB1046A-DCI only fixes the DCI interface in the device. Do you need this DCI function?

0 Malik Barton57 over 5 years ago in reply to Malik Barton57

TI__Guru 64326 points

Tamio,

Is there any more support needed for this issue? If so please reply with any relevant details so that I can further assist you. For now I will be marking this thread as "TI Thinks Resolved". If you have resolved your issue, please post the solution to the original problem/post for others with similar issues.

Interface

Interface forum

TUSB1046A-DCI: How to get EVM with TUSB1046A-DCI