• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 161 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM26LS32AC: Minimum pulse width specification

Takeshi Sasaki
Expert 4480 points
Part Number: AM26LS32AC

Hi team,

Could you give me comments on the following customer questions?

<Customer question>

Q1. Does AM26LS32ACNS have minimum input pulse width specification to be able to detect?

Q2. Does AM26LS32ACNS have minimum output pulse width specification to be able to detect?

Thank you for your support.

Best regards,

Takeshi Sasaki

  • 0
    TI__Guru 62910 points
    Hello Sasaki-san,

    While the device does not have such specifications, it is true that very fast pulses on the input may be filtered by the finite input bandwidth of the receiver. To be conservative, you could assume that pulses should be at least as long as the propagation delay through the device (i.e., 35 ns). Please let me know if this is not clear or if you have any further questions.

    Regards,
    Max
  • 0 in reply to Max Robertson
    TI__Expert 4480 points
    Hi Max,

    Thank you for your suggestion. I think it's reasonable assumption. Thank you for your help.

    Best regards,
    Takeshi Sasaki