This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TLK110: Does TLK110 have any resister bit for compliance test like DP83822?

Guru 14300 points

Replies: 2

Views: 66

Part Number: TLK110

 Hello guys,

 One of my customers is using TLK110 for their latest products.

 They have the following question about TLK110. Could you please give me your answer or comment?

 Q. They want to do a compliance test for their products which use TLK110.

 They found DP83822 compliance test application note as the follow.

 DP83822 IEEE 802.3u Compliance and Debug

http://www.tij.co.jp/jp/lit/an/snla266/snla266.pdf

 They knew DP83822 has some dedicated bits for the compliance test by the document.

 They want to know whether TLK110 have any resister bit for compliance test like DP83822 or not.

 If the answer is no, could you tell me whether TI have any document about TLK110 register setting for compliance test?

 

 Your reply would be much appreciated.

 Best regards,

 Kazuya Nakai.

  • Hello Kazuya-san,

    The ethernet compliance testing, customer can use the same script (A1, A2, A3) as described in DP83822 app note to test TLK110. Also TLK110 is not recommended for new design, our latest recommendation for new 100Mbps ethernet is DP83822.

    -Regards
    Aniruddha
  • In reply to Aniruddha Khadye:

    Hello Aniruddha,

    Thank you very much for your reply.

    I will inform it to the customer.

    Thank you again and best regards,
    Kazuya Nakai.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.