This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

DS280DF810: Configuration suggestion to customer specifications.

Expert 1945 points

Replies: 3

Views: 107

Part Number: DS280DF810

Hello

My Customer will use Fanout fuction in DS280DF810.

The block diagram is shown below.

The Net Configuration is shown below.

Data Rate : 25.78125Gbps

please Can you Check the this configuration?

and Provide to me Recommend a Setting for reference.

Best regards.

  • Hi,

    The TI DS280DF810 programming guide document contains a section with "Common Device Configurations", which includes recommended retimer settings for both optical front port egress and ingress application cases. You may request access to this document via the TI.com DS280DF810 product page (web link below.) Just click on link below "Special Note."

    http://www.ti.com/product/DS280DF810

     

    Cordially,

    Rodrigo Natal

    HSSC Applications Engineer

  • In reply to Rodrigo Natal:

    Hi Rodrigo

    Can you provide to me the programming guide document?

    I request the Special note. but did not provide it.

    I need full datasheet & programming guide document.

    Best Regards.

  • In reply to Louis Han15:

    Does your company have NDA in place with TI? If not, we need to wait for your "Special Note" request to be approved by TI marketing. Typical turnaround is 2-3 days.

    Cordially,

    Rodrigo Natal

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.