• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 209 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB933-Q1: how to use DS90UB933-Q1 on TDA2PX device

terence xia
Genius 3105 points
Part Number: DS90UB933-Q1
Other Parts Discussed in Thread: DS90UB964-Q1, , TDA2HG

Hello,

We need to send data from DS90UB933-Q1 to DS90UB964-Q1. As below, how do we do in the VSDK 03 05?

ps: DS90UB933-Q1 tied on TDA2HG device and DS90UB964-Q1 tied on TDAPX device, TDA2HG and TDA2PX board are all run VSDK 03 05（linux+BIOS）

Thanks

Terence

  • 0
    TI__Mastermind 30515 points

    Terence,

    This is one general application between UB933/964 and TDA. May I know whether you can contact local TI TDA FAE or dist. FAE, we have many cases on it in the market, you can easily set the UB933 or UB964 based on your design request.

    For most cases, the UB933 has no setting request, you just set UB933 with pin mode. For UB964, you need set the FPD-Link channel feature and CSI feature based on your connection. You can refer to DS90UB964 EVM user guide page22, which has one script example on how to set UB964's register.

    best regards,

    Steven

  • 0 in reply to Steven(Shenzhen) Shi
    Genius 3105 points

    Hi Steven,

    Thank you very much.

    We can not contact local TI TDA FAE  now.  May be on vacation. We have read DS90UB964 EVM user guide page22, but we don't understand how to set  UB964's register in the VSDK 03 05. It said like "board.WriteReg(0x13,0x8D)", but how to apply it into VSDK.

    Terence