This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

DS90CR285: DS90CR285

Prodigy 130 points

Replies: 1

Views: 76

Part Number: DS90CR285

Hi,

 i AM USING DS90CR285 IN MY PROJECT,

in single "TCIP" period Falling edge  we need to load 28 bit data (or) we should use 28 TCIP clock period Falling edge to load 28 bits data (1bit / TCIP clock period). kindly confirm....

  • Helo Sheree,

    DS90CR285 uses a rising edge data stobe, so you should load the data in on the rising edge of TxCLK IN. One TCIP period is used to sample 28 bits of data. 

    Best Regards,

    Casey 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.