The values of heo and veo for all channels are listed below:
finsh>>get_ch_reg(8,0x27)
ch = 0, val = 0x0d
ch = 1, val = 0x15
ch = 2, val = 0x0d
ch = 3, val = 0x17
ch = 4, val = 0x0d
ch = 5, val = 0x16
ch = 6, val = 0x08
ch = 7, val = 0x15
0, 0x00000000
finsh>>get_ch_reg(8,0x28)
ch = 0, val = 0x37
ch = 1, val = 0x5a
ch = 2, val = 0x3e
ch = 3, val = 0x4c
ch = 4, val = 0x3c
ch = 5, val = 0x60
ch = 6, val = 0x33
ch = 7, val = 0x50
0, 0x00000000
Eq gain and VGA gain have been set. Because there are bit errors, we should increase the value of heo and veo.
Which registers can be set to amplify heo and veo?