TIOL111: TIOL111 RX state in EN=L

Iwata Etsuji

Expert 6380 points

Part Number: TIOL111

Hello team,

Could you please clarify the RX state in EN=L?

Best regards,
Iwata Etsuji

over 4 years ago

0 Eric Schott1 over 4 years ago

TI__Mastermind 47895 points

Hi Iwata-san,

The EN pin is described as the Driver Enable. It does not enable/disable the receiver on the device. Therefore, when EN=L the RX pin will continue to reflect the state of CQ.

Regards,
Eric

Interface

Interface forum

TIOL111: TIOL111 RX state in EN=L