This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TLK2501: TLK2501

Prodigy 40 points

Replies: 6

Views: 52

Part Number: TLK2501

Dear Atul,

is there any verilog simulation model available for TLK2501?

If yes, could you please send me the model?

Thanks a lot

Majid

  • Hi Majid,

    The closest model I have is attached.

    TLK3101_IBIS_Model.zip

    Regards,

    Lee

  • In reply to Lee Sledjeski:

    Dear Lee,

    thanks for the model.

    It was the IBIS model, i am looking for the verilog simulation model for a digital simulation.

    You can please ask Mr. Atul Patel.

    the file name is something like this: tlk2711_modelsim_12032010.tar

    Best Regards

    Majid

  • In reply to Majid Ghameshlu:

    We unfortunately don't have Verilog model.

    Cordially,

    Rodrigo Natal

    HSSC Applications Engineer

  • In reply to Rodrigo Natal:

    Hello Rodrigo,

    looking to this post from Mr. Atul indicates that TI has the simulation model:

    please ask Mr. Atul Patel for the mo0del.

    Thanks

    Majid

  • In reply to Majid Ghameshlu:

    this was the text from Mr. Atul:

    ######################################################

    Roberto,

    The model for the TLK2711A was developed from the parent device model (TLK2501) and therefore it looks like the TLK2711A model retained some of the pin naming conventions used in the TLK2501.  For the sake of the TLK2711A model, please use the following reassignments:

    PRE = RREF

    TKLSB = TX_ER

    TKMSB = TX_EN

    RKMSB = RX_DV

    RKLSB  =  RX_ER

     

    Thanks ,

     

    Atul Patel

    Texas Instruments

    Atul Patel

    ######################################################################

  • In reply to Majid Ghameshlu:

    Hi,

    I've reached Atul Patel. He's confirmed that these Verilog model files unfortunately are no longer available nor supported.

    Cordially,

    Rodrigo Natal

    HSSC Applications Engineer

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.