This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSICE3359: TLK110 PHY

Part Number: TMDSICE3359

Hi,

I want to use Ethernet Phy TLK110PT product in my project. But we encountered the following warning on the TI site. Will we encounter a problem in providing this product in the future? If the product is not available, Can you recommend a different product that is pin to pin and the same specifications?

  • Hello Cagla,

    I would recommend you use the DP83822 or DP83826 in your project.

    Thanks,

    Vibhu

  • Hi Vibhu, 

    Thank you for your return. I examined the IC's  which you advised me and I found two circuit. I wan to use AM335X processor and get reference AM335X ICE Board but When I examine Ethernet circuit in the ICE Board I saw that both MII and RMII protocol was used. By the way, I saw the second circuit which was used DP83867I. MII protocol was used in the second circuit. The circuits are similar to each other but I also saw some differences.  I shared both circuits below. I have some questions.

    • Can I used second circuit in my project instead of first circuit without changing?
    • Which changing should I make in second circuit for using in my project?
    • Also I want to use linux arago If I use second circuit in my project Do I have to make changing in kernel?

    Thanks in adv ance for your interest.

  • Hi,

    DP83867 is Gigabit PHY and is not form factor compatible. We recomend to use DP83822. You can choose MII or RMII based on your current design implementation.

    Regards,

    Geet