This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: SN65HVD1782
I'm currently using part SN65HVD1782 for RS485.
Can you tell me if this interface will support J1708 protocol.
If it does support J1708, is there much of difference to the driver circuit?
Yes, J1708 uses the RS-485 physical layer and so an RS-485-compliant transceiver like SN65HVD1782 (or SN65HVD1782-Q1) could be used by sending data on the "DE" control line (rather than the usual "D" input). You would need to invert the polarity on the DE line (so that the logic polarity matches what is expected in J1708), tie the D input to GND, and use the recommended bus biasing/termination circuit for J1708. Figure 4 in this application note gives an example circuit:
Please let us know if you have further questions.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.