LMH1219: tool to parse registers

Errol Leon6

Expert 5830 points

Part Number: LMH1219
Other Parts Discussed in Thread: SIGCONARCHITECT, USB2ANY

Hello team,

My customer is using LMH1219 in their design and they are trying to debug an issue they are seeing with the device.

Do we have tool to parse registers to tell what is happening?

They are currently using a 3G-SDI.

Thank you in advance for your support!

Errol

over 4 years ago

0 Nasser Mohammadi over 4 years ago

TI__Guru* 88835 points

Hi Errol,

We can use SigconArchitect GUI to read all registers. This GUI has Low Level tab that allows the user to read all registers. Please note to use this GUI we need to use LMH1219 updater file and this is on a secured folder. You now have access to this GUI. Also, SigconArchitect is on the following link:

http://www.ti.com/tool/SIGCONARCHITECT?keyMatch=SIGCONARCHITECT&tisearch=Search-EN-everything&usecase=part-number

Regards,, Nasser

0 Errol Leon6 over 4 years ago in reply to Nasser Mohammadi

TI__Expert 5830 points

Hi Nasser,

The customer is currently test it in the final form factor in an embedded environment. Do you know if there is a Linux driver for the part? Or a tool we can use there?

Thanks!

Errol

0 Nasser Mohammadi over 4 years ago in reply to Errol Leon6

TI__Guru* 88835 points

Hi Errol,

We do not have a linux driver. Please note as long as they have SMBus access they can use this GUI to check low level register values. In this case, they will use a USB2ANY box to interface to SMBus signals on their board. Then this GUI on a pc can control the part.

Also, please let me know what kind of problem they are chasing. What is the issue?

Regards,, Nasser

Interface

Interface forum

LMH1219: tool to parse registers