This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TS3USB3000
Could you help to review the below schematic? In order to simplify the layout, the customer has designed the following schematic. Use 1# IC USB+ to connect 2# USB-, and USB- to USB+. The same is true for MHL+/-. Is the physical interface inside the +/- port exactly the same? Thank you.
yes, it works.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Brian Zhou:
Is the physical interface inside the +/- port exactly the same? Because there is some issue when identify USB flash drive in this situation.
In reply to Ansel Song:
it's just passive mux, nothing USB related inside.
Got it, thanks.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.