• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 226 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLIN1021-Q1: How to wake MCU after TLIN1021 wake up

Chen Jiao
Intellectual 810 points
Part Number: TLIN1021-Q1

Hi team,

Could you please tell if there is reference circuit for waking up local MCU after TLIN1021 remote wake up?

Thanks a lot.

Best regards

Chen

  • 0
    TI__Guru 62910 points

    Hi Chen,

    In most cases, the INH signal could connect to an enable input on the power regulator used to power the MCU so that it starts up automatically after a wake request has been detected by the LIN transceiver. Please let me know if this is not clear or if you have further questions.

    Regards,

    Max