• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 122 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867E: :

Onur Kusakoglu
Intellectual 960 points
Part Number: DP83867E

Hi,

Since powers are stated as analog (except VDDIO) in the datasheet, Is there a recommended way of schematic entry for power and ground signals or is there a specific layout recommendation for power and ground planes?

Best regards

Onur

  • 0
    TI__Genius 16025 points

    Hi Onur,

    There are no special guidelines other than usual best practices of :

    1. Planes of ground and supply.

    2. Maximum possible number of ground vias to connect thermal pad to the board ground.

    3. Decap to be places as close to the respective pins.

    --

    Regards,

    Vikram