TUSB1044: Does support flipping of USB3.1 / DP signals

Risto Toljamo1

Part Number: TUSB1044

Hi,

We are designing testing features to our customer and they need test USB Type-C cable flip without removing cable from the products. Does TUSB1044 support that?

Thanks,

-Risto Toljamo

over 3 years ago

0 Malik Barton57 over 3 years ago

TI__Guru 64326 points

Hi Risto,

If I understand the requirement correctly you can change the internal mux configuration through I2C while the cable is connected (after power-on reset). To do this customer will need to change the FLIP bit. What is being tested in this scenario?

0 Risto Toljamo1 over 3 years ago in reply to Malik Barton57

Prodigy 20 points

Hi Malik,

Thanks for quick reply.

Our customer want to test USB Type-C cable flip without cable removal. This will be in fully automated final tester of multiple products. With this IC we are able switch for example TX1 to TX2 and back?

Thanks,

-Risto

0 Malik Barton57 over 3 years ago in reply to Risto Toljamo1

TI__Guru 64326 points

Hi Risto,

Yes, that is correct.

Interface

Interface forum

TUSB1044: Does support flipping of USB3.1 / DP signals