SN65DSI83: I want to know the specific settings of SN65DSI83.
Part Number: SN65DSI83
I don't understand question (1). If the required clock frequency for you LVDS panel is 148.5 MHz, then the DSI CLK from your source will need to be 445.5 MHz. If the required clock is 150 MHz, then the DSI CLK will need to be 450 MHz.
(2) You did not ask a question here. However, this section of the tool is just informational, as it does not change any of the registers. It does not really matter what you put here
(3), (4) if you're specifying an LVDS CLK of 150 MHz then your REFCLK will also need to be 150 MHz
Also, it looks like some of window of your DSI-Tuner is getting cut off. Can you use this one instead:
7077.DSI Tuner 2.1.zip
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to I.K. Anyiam:
Thank you for your reply.
.Regarding REF CLK @H2pin,
I input a duty 50% CLK.
Is the SN65DSI83 acceptable?
In reply to user6438649:
Yes, that's fine. You should also make sure it meets the specs listed in the Switching Characteristics table.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.