• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8020B: Compliance test.

Kengo.Y
Guru 10385 points
Part Number: TUSB8020B

Hi team,

My customer wants to do the USB compliance test of TUSB8020B.
Should they set the device TESTpin(10pin) to high when doing this test?

Sincerely.
Kengo.

  • 0
    TI__Guru 60865 points

    Hi Kengo,

    No, the TEST pin is for factory test only.  The customer should follow the USB compliance test procedure documented by the USB-IF on the usb.org site.  Please let us know if you have any difficulty.

    Regards,

    JMMN