We had a working DP link between our DP source, EVM and monitor. This is no longer the case.
We downloaded a new image to flash and lost the DP link.
We then downloaded the original binary file to flash. The original binary has been provided by a TI employee, here: e2e.ti.com/.../957271
The flash content is good as verified by a readback-compare operation but the the EVM no longer works: no DP link, no I2C communication. Nothing.
Recovery function from Application Customization Tool does not restore proper operation either. No DP link, NO I2C communication. Nothing.
However, we are able to create and program a new flash image that does restore I2C communication. DP link remains dead but it is likely wrong registers settings.
2 questions:
1- How can we restore "out-of-the-box" operation for the EVM?
2- We are the registers settings to include in our own Application Customization Tool project so to have DP link working on the EVM?
Thank you for your assistance
Frederic