This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPD2S300
My customer is designing Type-C USB application (Only DFP, USB2.0, no PD) with TUSB320LAI, AM335x and TPS2069D.Then they are asking what ESD devices are the best for this configuration.
I found some similar posts in E2E, but I’m not still clear. Because it doesn’t use PD, VBUS is 5V. So they don’t need to think about 20V VBUS short to CC pins ideally.So if they don’t worry about the VBUS short, just putting usual ESD component like TPD4E5U06 or ESD122 on CCx/DP/DM is enough.But if they want to think of any irregular cases, putting TPDS6S300A on CCx/DP/DM or TPDS2S300 on CCx and ESD112 on DP/DM would be good solution.The above is my understanding. What do you think?
And how to think about VBUS pin? Is it common to put any ESD or TVS on DFP VBUS line?
If it is type-c only, I do not think you need large protection on VBUS unless you need ESD protection. The TPS25810 is our Type-C only controller and the TPS25810EVM is a good example schematic to look at for protection. We have a bypass capacitor on VBUS and no protection on CC. I would still recommend something like the TPD1E05U06 for the CC lines, if you submit a question under the tag TPD1E05U06, that team will also be able to point you in a good direction. If you want ESD protection you can add a TVS2200.
If the customer is expecting 20V on VBUS, then it is recommended to add a TVS2200 to VBUS and have either the TPD2S300 or the TPD6S300A as protection for the other pins.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.