This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IO-Link Protocol with SN65HVD102

Other Parts Discussed in Thread: SN65HVD102

Hi,

I am new to io link protocol and need help in developing pressure sensor with io link interface using SN65HVD102. I have some questions regarding this,

How to specify requirement for io link?
How to create iodd file?
Can I develop io link stack on my own?
How to register for vendor id and device id?
How to register for io-link?

Kindly guide me to proceed further.

Thanks,

  • Hi Anjali,

    I do not know specific answers to your questions as I only support the physical layer of the link. Most of your question reside around the protocol (data link) layer. I would start at the IO Link website to gain knowledge about it and then please follow up with me if you have unanswered questions as we can work through them together. You can download the current standard for free and also dig through their community for answers to your questions.