Other Parts Discussed in Thread: ALP
I received a question about the DS90UB954-Q1 from my customer. Could you please support the questions below?
I connected the DS90UB954EVM and our product board with DS90UB954 via I2C, and I would like to set the our product board with DS90UB954 to output eye pattern mode.
I have stopped the communication from the I2C master on the product board to the I2C slave on the DS90UB954.
Analog LaunchPAD cannot recognize DS90UB954 (I2C-Address: 0x7A (8 bit)) on the our product board.
On the other hand, the DS90UB954 (I2C-Address: 0x60) on the EVM side is recognized.
1. Is it possible for Analog LaunchPAD to recognize multiple DS90UB954s?
2.Are there any restrictions on the DS90UB954 I2C device addresses that can be connected?