Interface

Interface forum

State Resolved
Locked Locked
Replies 4 replies
Answers 1 answer
Subscribers 32 subscribers
Views 178 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

SN65LVDS33: :

Onur Kusakoglu

Intellectual 960 points

Part Number: SN65LVDS33
Other Parts Discussed in Thread: SN65LVDS31, , SN65LVDS31-32BEVM

Good afternoon,

I have sn65lvds31 on one of my board(I dont have this board yet) and sn65lvds33 on one of my other board. I would like to test sn65lvds33 by creating PWM LVDS signals and I can't use my own board which has sn65lvds31 because I dont have it yet. Do you have a tool suggestion or an evaluation board suggestion for this?

Thanks a lot for your help.

Best Regards,

Onur

over 3 years ago

0 Ikechukwu Anyiam over 3 years ago

TI__Mastermind 35130 points

Hi Onur,

You could use the SN65LVDS31-32BEVM. Either that or simulate the signal with a function generator.

Regards,

I.K.

0 Onur Kusakoglu over 3 years ago in reply to Ikechukwu Anyiam

Intellectual 960 points

Hi,

Thanks for the fast reply.

Why not SN65LVDS31-33BEVM?

I have SN65LVDS31 on one of my board and SN65LVDS33 on my other board.

Best regard.

+1 Ikechukwu Anyiam over 3 years ago in reply to Onur Kusakoglu

TI__Mastermind 35130 points

That's fine too. You mentioned you already had the SN65LVDS33 so I figured you only needed SN65LVDS31.

Regards,

I.K.

0 Onur Kusakoglu over 3 years ago in reply to Ikechukwu Anyiam

Intellectual 960 points

Ah okay,

Just in case if I also need both, SN65LVDS31-33BEVM suits best.

Thanks a lot.